In addition to the transpose function, you can also fine tune the Super 6. To enter the global fine tune mode, press the SHIFT button. You will then be able to adjust the fine tuning by means of the MOD
AMOUNT rotary control.
If you turn the MOD AMOUNT control clockwise, the frequency will be increased. If you turn the rotary control counter-clockwise, the frequency will be decreased. You can adjust the fine tuning over a range from -1 semitone or -100 cents to +1 semitone or +100 cents.
As soon as you touch or slightly move the MOD AMOUNT control, the LEDs of patch and bank select buttons 1-8 and A-H will indicate the current fine tuning setting.
If you turn the MOD AMOUNT control clockwise the number of lit LEDs will shrink towards the right when the fine tune amount is negative and grow towards the right when the modulation amount is positive. The effect is reversed when turning the MOD AMOUNT control counter-clockwise. The printed line at the very top of the patch and bank select button section serves as a legend for what amount of fine tuning is being indicated by the lit patch select button LEDs.
Note: When you adjust the global fine tuning, the middle octave LED will continue flashing even after you exit shift mode to indicate that the default global tuning has been changed.